XIAOMI Mijia Lint Remover 2

Notes:
1. 6-leaf steel blade: The blades of this product are made from 30Cr13 (martensitic steel plate and strip). Data comes from manufacturer and is for reference only.
2. Powerful 6000 rpm motor: After fully charging the product, the motor speed was measured 1 minute after startup. The results showed a rotation speed of 6000rpm ±10%. Data comes from manufacturer and is for reference only.
3. 0.35mm-thick; approx. 1.4mm and 2mm hole size: Multiple samples of the fabric protection mesh cover were tested for thickness and mesh aperture. The results showed a mesh cover thickness of 0.35mm ±0.5mm, a small mesh aperture of 1.4mm ±0.1mm, and a large mesh aperture of 2mm ±0.1mm. Data comes from manufacturer and is for reference only.
4. 180 minutes of continuous use; lasts for 3 months at a time: Tests conducted under no-load conditions show that a fully charged product can run for over 180 minutes before shutdown. Based on a weekly use of 15 minutes per session, the product can last approximately 12 weeks, or 3 months. Data comes from manufacturer and is for reference only.
*Do not press on the lint remover during use to prevent fabric threads from entering the mesh of the blade cover and damaging clothing.
*This product is suitable for fabrics such as sweaters, wool coats, trousers, scarves, gloves, and pure cotton bed sheets and duvet covers. It is not recommended for use on other types of fabrics.
*This product is only intended for removing lint from fabrics.
*The images on the page are for illustrative purposes only. Actual product effects (including but not limited to appearance, colour and size) and images (including but not limited to background, UI and illustrations) may vary slightly. Please refer to the actual product.
*Unless otherwise specified, all data above comes from manufacturer. Actual usage may vary slightly due to environmental differences.