1. Why does the water dispenser discharge a section of room temperature water first after it is powered on?
After the power is turned on, 100ml of normal temperature water will be discharged first, which is to clean the pipeline and prevent dry burning
2. Why is there no water when four lights?
1.)The machine has a water shortage alarm function. If the water tank water volume is lower than the lowest water level line, the 4 indicator lights will start to flash and a beeping alarm sound (after flashing for 30 seconds, it will enter the locked state), please add water to the highest water level ，then use it.
2.)The float is not put in or the float is not sensed. If it is not sensed, please take the float out and put it in again
3. Why is there a difference in the water temperature in the cup?
The temperature of the water in the cup receives the actual voltage, altitude pressure, ambient temperature, and heat loss factors when the warm water stays, and it will be different from the indicated temperature.
4.Why does the water level gear show 5 flashing lights, but nothing happens when I press it?
When 5 lights flashing, the machine over-temperature alarm, you can set the boiling point manually (the setting method :
When the machine is locked, press and hold the "Boiled Water" and "Normal Temperature" buttons at the same time, the four indicator lights will flash, and then press the altitude button corresponding to the altitude.)
